A while back, I’d bought the Nokia 6610 LCD thinking of it as a nice cheap display to incorporate into certain projects.
When I finally got around to using it, I thought of looking for instructables/references on interfacing it with the RasPi, but all I found was:
and slowly learnt that this particular display has been quite a challenge for the online community for a while now. I did find very nice posts about how to interface it with other platforms though:
But after a lot of hunting, once I started looking for projects based on the LCD’s drivers, I finally came across a github project:
I really felt a rush of gratitude towards him once I found this because the task of porting the entire C library to be used with the Raspberry Pi through Wiring Pi seemed too daunting to me. Or atleast something I’d be too lazy to do to run a simple colour LCD 😛
All the steps for running the LCD are there on his git page. In short,
1.Make the connections:
2. Get his code
3. Run it and test, convert images to the relevant dimensions (132×132 pixels) and file format, and use the python modules he’s created.
I just hope this post helps somebody else find this particular implementation much sooner that it took me considering how easy things became once I found this. Major props to Pedro. 🙂
In terms of connections, I ended up using a 330 Ohm resistor between 12V and the LED+ pin to make the display bright enough, I tried to use the 7806 but IMHO the display wasn’t really readable.
Here’s my setup:
P.S.: In case anybody’s having issues running the D-Link DWA 132 N300 Wi-Fi Dongle with the Pi, check out:
Works like a charm and the dongle is one of the most reliable ones I’ve used.
P.P.S.: If you want to make your own bench power supply and haven’t seen this yet, check out my post: